177400 CU 7702 4P / 2x4P F8 Data cable, S/FTP, Category 7A, AWG22

Category 7A
Manufacturer — Datwyler
1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.5 mm ∅
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH orange RAL 2003


Description
Electrically and mechanically superior quality Cat.7A data cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and prEN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.

Application
Data cable for structured premises cabling.
For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801 and for the transmission of broadband signals (such as cable TV) in accordance with IEC 15018.
Due to the increased wire section eminently suited for Power over Ethernet (PoE) / PoE+.

Electrical characteristics
Category 5e 6 6A 7 CATV 7A
Frequency [MHz] 1 4 10 100 250 500 600 862 1000 1200
Attenuation [dB/100m] 1.7 3.4 5.3 16.9 27 40 42 53 56 62
NEXT [dB] 103 103 103 103 103 98 96 92 90 85
PS NEXT [dB] 100 100 100 100 100 95 93 89 87 82
ACR-N [dB] 101 100 98 86 76 58 54 39 34 23
PS-ACR-N [dB] 98 97 95 83 73 55 51 36 31 20
ACR-F [dB] 109 107 105 93 83 70 65 57 54 46
PS-ACR-F [dB] 106 104 102 90 80 67 62 54 51 43
Return loss [dB] 26 30 33 33 28 26 25 24 23 21
These performance data are typical measured values.

Electrical properties
Loop resistance at 20˚ C: 116 Ω/km
Mutual capacitance: 43 pF/m
Impedance at 100 MHz: 100 Ω ± 5 Ω
Transfer impedance at 1/10/30 MHz: < 5/5/8 mΩ/m
Coupling attenuation
(limit curve of critical state - IEC 61156): > 85 dB
Near end unbalance attenuation
LCL at 1-600 MHz : > 40 dB
Delay skew: 15 ns/100m
NVP: 76 %

Mechanical properties
CU 7702 4P CU 7702 2x4P F8
Bending radius
(flat side) during draw-in: ≥ 64 mm ≥ 64 mm
permanently installed: ≥ 32 mm ≥ 32 mm
Tensile strength: ≤ 120 N ≤ 240 N
Crush resistance: ≥ 1000 N/10 cm ≥ 1000 N/10 cm
Impact: ≥ 10 impacts ≥ 10 impacts
Temperature
range during installation: 0° C to + 50° C 0° C to + 50° C
in operation: -20° C to + 60° C -20° C to + 60° C

Standards
Wire colour
white-blue/blue white-orange/orange white-green/green white-brown/brown (with longitudinal stripes) in accordance with IEC 60189 and IEC 60708
Imprint
DATWYLER «cable type» «additional text» «batch number» «meter marks»
Zero halogen, no corrosive gases
IEC 60754-1/-2, EN 50267-2-1/-2-2, VDE 0482-267-2-1/-2-2, AREI-RGIE Art.104-SA
Flame propagation
IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1
Flame spread
IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2
Smoke density
IEC 61034-1/-2, EN 61034-1/-2 , VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD
PoE
IEEE 802.3at
EMC
shielded
Segregation class
d
Cat./Class
Cat 7A / Class FA - limit values as specified by IEC 61156-5 and EN 50288-9-1 guaranteed